If you rely on hydraulic tools to get jobs done, it can be a costly problem when they quit working. Often, it is easier to replace the tools rather than try to have them repaired. Knowing what is causing the problem with your tools will help you fix issues to get more use out of your tools. The following hydraulic tool repair guide will help you deal with some of the most common issues that can cause your equipment to fail:
Worn Quick-Connect Fittings
The hydraulic tools you use for your jobs need to have connections that can be attached quickly. This is why most hydraulic and pneumatic systems use quick-connect fittings. Over time, these fittings can wear out and make it difficult to connect hoses and attachments to equipment. A hydraulic tool repair service can replace fittings and install hoses when these parts wear out.
Blown Seals and Fluid Leaks
The seals of hydraulic systems are a very important part of tools. They prevent fluid loss, to allow the flow to move pistons. These pistons are under a lot of pressure, which can cause them to fail. When hydraulic seals fail, the system loses fluid, and the tool has less power to do a job. Therefore, you may need to have any blown seals replaced when you have problems with your equipment.
Damaged Hydraulic Piston
One common problem with many hydraulic and pneumatic tools is a bad hydraulic piston. The piston of your tool is what provides the power to do work. When the hydraulic piston is damaged, you may have trouble operating a tool, or it may not work at all. When your tools have damaged pistons, you will want to take them to a professional repair service to have these issues fixed.
Bad Hydraulic Control Valves
Some tools need to have hydraulic control valves. These control the pressure and volume of fluid needed for the hydraulic system. Sometimes, the hydraulic control valves can go bad and need to be repaired or replaced. A qualified tool repair service will be able to test the control valves to determine what repairs are needed to get the systems working again. If you are having trouble with controlling the tool due to too much or too little pressure, a hydraulic pressure control valve may be needed to improve the performance of the equipment.
The problems with your hydraulic tools can often be fixed if you know what has caused them to fail. Contact a hydraulic tool repair service, like a Greenlee tool repair service, to fix your equipment before problems get worse.
When something breaks, what do you do? If the item is something small like a hair tie or a sock, you probably throw it away, and that is completely understandable. But when the item costs $100 or more to replace, you should really attempt to have it repaired rather than just tossing and replacing it. There are companies that will repair most anything, from pants to toasters. Sometimes it just takes the right know-how and a simple part to get something working again.
If you like the idea of repairing things rather than tossing them out, then you're going to love this website. It's all about repairs!